Synthetic fibers for reinforcing cement based mortars or industrial concrete floors

Synthetic fibers for the reinforcement of concrete based industrial floors and cement screeds (e.g. on industrial floors with NOVADUR S final cover). Due to their special composition they can be also used for reinforcing low thickness mortars such as wall levelling compounds, plasters, tile adhesives, in order to increase their tensile strength and slip resistance.

Consumption: 600-900 gr/m³ of dry mix
Package: Packages 900 gr


  • Polypropylene fibers NOVAMIX FIBER:
    • are used in mortars and concrete for:
      • strengthening and reducing cracks
      • improving elasticity and tensile strength
      • enhancing impact and abrasion resistance
      • increasing frost resistance
      • reducing water and chemical agents’ permeability
      • not affecting the finishing characteristics
      • improving the durability of the surface
    • Are available in watersoluble bags ready for mixing as well as in large packages
    • Can be stored for a long time
  • Available in bags soluble to water
  • Dimensions: 6mm, 12mm
  • Packaging: plastic bags of 25 pcs


Polypropylene fibers are added directly to the concrete or mortar mixing  system, while batching the ingredients. Mix the mixture well for at least 2  minutes.

Use 6 mm fibers if the aggregates are less than 10 mm. In case the aggregates  are bigger than 10 mm then use 18 mm fibers.

The recommended amount is at least 600 g / m³ of concrete or mortar.


  • Polypropylene fibers do not replace the concrete static reinforcement
  • The standard rules of good concreting practice, concerning production as  well as placing, are to be followed
  • Fresh concrete must cure properly

Legal Notice:

The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website