Plastic anchors

Plastic anchors. They are used for the correct fixing of thermal insulating panels applied in external thermal insulation composite systems.


  • Plastic anchors are suitable for a variety of substrates such as:
    • concrete from C12/15 up to C50/60
    • solid and porous bricks
    • autoclaved aerated concrete
  • Quick and easy installation by simply tapping the pin with a hammer
  • Strong anchorage thanks to the expandable element
  • No thermal bridges are created, they contribute to energy savings
  • Plate diameter: 60 mm
  • Anchor diameter: 8 & 10 mm
  • Anchor length: 70 – 260 mm

Substrate preparation:

Cementitious substrates must be solid, free of cracks and free of dust, salts, grease and any other materials that could reduce the adhesion of the system.

Application method:

The anchors are placed in the holes that we have opened. The choice of drilling tools should be made depending on the substrate. The drilling depth, in the substrate, must follow the technical specifications were in solid substrates it is at least 5-6 cm, while in the case of porous 8-9 cm. The number, position and type of anchors are determined by the specifications.


  • Always use suitable equipment
  • Select the correct anchor length according to the thickness of the thermal insulation board, the substrate and the load
  • It is recommended that the application be done by a professional user

Legal Notice:

The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website