Substrates must be clean, dry, well-cured and free from oil, grease, cement laitance and loose parts.
Before applying stir the contents of the container until a homogenous mixture. PLANO CONTACT may be applied to the substrate by brush or by roller. Once dry you can apply the plaster or mortar. The waiting time varies depending on the environmental conditions and absorbency of the substrate. For light absorbent surfaces it can be diluted up to 10% with water.
Avoid using PLANO CONTACT:
- In cases where the substrate and environment temperature is less than +5°C or higher than +35°C as well the relative humidity is greater 80%
- on wet substrates
Also note the following:
- Never exceed the maximum recommended quantity of mixing water (10%)
- Protect the tiled surface from rain and frost for the first 3 hours
- Application should be performed by professional users
The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.