PLANOFINISH HP

Surface action sealant in liquid form

Liquid, water-based, enhanced with synthetic polymers surface sealant of high abrasion resistance. The extremely small particle size effectively seals the micro-pores of the surface, resulting in the prevention of pollutant accumulation. At the same time provides a pleasant texture to the protected surface. It is applied as a final protection layer over microcement coating varnishes, such as PLANOFINISH PU 2KW MAT, facilitating the daily cleaning of the surface. It can also be applied as final step of terrazzo polishing procedure to achieve a high-quality gloss and protection.

Consumption: 30 – 40 m²/L
Color: White emulsion
Package: Containers 1 L, Containers 5 L
Pallet: 450 L, 480 L

Description

  • PLANOFINISH HP surface action sealant in liquid form:
    • is suitable for:
      • surface protection such as:
      • applications in:
        • high traffic areas, hotels, shops, residences, etc.
        • outdoors, floors and walls
        • indoors, tables, kitchen benches, humid areas
    • offers:
        • increased protection against dirt, shoe and rubber marks
        • easy to clean, in most cases only water is enough
        • increase in gloss using highspeed rotary machines at the end of mosaic treatment
  • Form: Liquid
  • Density: 1,05 ± 0,05 kg/L
  • pH: 7,5 ± 0,5

Application:

The surface to be treated with PLANOFINISH HP should be completely clean. Apply insoluble, in a small amount evenly across the surface with a microfiber cloth and allow it to dry. With a clean cloth remove any excess. A second coat may also be applied if required. In this way, the surface gloss does not increase significantly.

To increase the gloss and protection at the end of the polishing of mosaic floors, it is recommended to use a high-speed rotary engine up to 1500 – 2000 rpm.

Recommendations:

  • Mix the product before use
  • Caution may increase the surface slip
  • Do not apply on surfaces with strong water, such as showers or stagnant waters
  • Do not apply at the substrate and ambient temperatures below + 10°C and above + 35°C
  • Do not apply it to highly absorbent surfaces without testing, a coating of PROTECT 300 S or PROTECT 900 S may be appropriate depending on the absorbency
  • Protect the material from frost
  • Keep out of the reach of children

Legal Notice:

The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.