BAUMENT RAPID FLOW

Accelerating and plasticizer admixture

Double-action admixture designed for producing fluid and fast drying floor levelling mortars. By mixing BAUMENT RAPID FLOW with cement, concrete sand and water in an appropriate ratio, an almost self-levelling cement mortar can be casted on site which rapidly dries. Cement screeds made with BAUMENT RAPID FLOW are ideal for floors, even of large thickness, which are to be covered with microcement, epoxy systems and other humidity sensitive coatings sensitive to substrate rising moisture.

Consumption: 1 - 3 L/25 kg cement
Color: Brown
Package: Containers 20 L, Containers 5 L
Pallet: 480 L

Description

  • BAUMENT RAPID FLOW is suitable for creating floor filling mortars that require:
      • ultra-fast drying and rapid expulsion of humidity
      • high mechanical strength
      • better workability
      • increased fluidity of the mix
  • For surfaces that will be covered:
      • in very short period time
      • with coverings sensitive to humidity such as wood, marbles, carpets, Microcement screeds, epoxy systems
  • Form: liquid
  • Density: 1,05 ± 0,05 kg/L
  • pH: 6 ± 0,5
  • Application temperature: from +5°C up to +35°C

Application of the mix:

Add the BAUMENT RAPID FLOW to the mixing water at the predetermined ratio. Slowly and while stirring add the cement to the water and then the aggregates. Alternatively, pre-mix the dry ingredients together and add them in the required amount. Mix with an electric or worksite mixer until you achieve complete homogenization of the mix, desired workability, without lumps.

Recommendations:

  • Shake well before use
  • Appropriate testing should be performed before application
  • BAUMENT RAPID FLOW should not be added in dry cement
  • First, always add the minimum amount of water and if more water is necessary, add it to the end of mixing
  • BAUMENT RAPID FLOW is not combined with retardants, plasticizers or other admixtures
  • Do not apply when substrate and ambient temperatures are lower than +5°C and higher than +35°C
  • In any case, you should ensure that the residual moisture content of the mortar is lower than that required by the coating product

Legal Notice:

The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.