PLANOPRIMER EPOXY

Two component, solvent and water free, epoxy primer for absorbent and not absorbent substrates

Solvent free epoxy primer for creating adhesion bridge on non-absorbent surfaces such as existing marble, ceramic tiles, metal, traces of epoxy paints in swimming pools. When applied before cement-based coatings such as PLANOCOLOR PREMIUM 2K or PLANOCOLOR PREMIUM SP microcement coatings, PLANOCOLOR GRANULATES S 500 silica sand must be scattered on the final coat, while it is still fresh. The sand that was not bonded must be removed the next day with pressurized air or by dry wiping, in order to obtain a substrate with uniform mineral surface, able to receive  the cementitious coating.

Consumption: 100-200 ml/m²
Color: Yellowish
Package: Containers (1,9+1,1) L

Description

  • PLANOPRIMER EPOXY primer is suitable for applications on substrates such as:
      • cementitious and plaster surfaces
      • ahydrite
      • high porosity
      • low absorbency
  • Form: liquid
  • POT life: ≈ 60 minutes / + 20°C
  • Walkability: after 24 hours / + 20°C
  • Application temperature: from +10°C up to +30°C

Substrate preparation:

The surfaces to which PLANOPRIMER EPOXY will be applied should be dry, clean, and free from substances that hinder adhesion such as grease, oils, dust, and deteriorated materials. The substrate should be sealed and not subject to rising moisture.

Preparation of the mix:

Add component B to component A and mix thoroughly for at least 2-3 minutes at low speeds. It is important to mix both on the walls and the bottom of the container to ensure uniform distribution of the catalyst.

Application:

The mixture should be applied using an appropriate roller or brush. Apply a continuous, pore-free layer, ensuring that the material penetrates the application surface well. If necessary, apply a second layer. In the case of subsequent epoxy or polyurethane coatings, the application should be done while the primer is still wet. If cementitious coatings are to follow after the adhesive layer has dried, then it is considered necessary to create a suitable surface on the still wet surface, such as using NOVAMIX S 500 silica sand.

Recommendations:

  • Always use the preset quantities of A & B components
  • During application, the minimum temperature of both the substrate and the environment should be +10°C, and the maximum should be +30°C.
  • The temperature of the substrate should be at least 3°C above the dew point to reduce the risk of condensation and bubble formation.
  • Low temperatures and high humidity levels prolong the curing time, while high temperatures significantly reduce the workability time.
  • Before application, ensure that the substrate's moisture content is < 3% by weight.
  • Application should be performed by a professional user.

Cleaning:

Clean immediately after use with NOVATHINNER PU solvent. Cured material can only be removed mechanically.

Legal Notice:

The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.