PLANOFINISH CH PLUS

High penetration mineral hardener/concrete densifier in liquid form

Concentrated aqueous densifier/hardener. It penetrates deeply, reacts with water-soluble calcium compounds and converts them water-insoluble and acid-resistant compounds. This reduces the porosity of the mortars, the risk of cracking and increases their hardness as well as abrasion resistance.

Consumption: 1 L/15-20 m² by dilution 1:2
Color: Transparent, light yellowish
Package: Containers 1 L, Containers 20 L, Containers 5 L
Pallet: 450 L, 480 L

Description

  • PLANOFINISH CH PLUS mineral hardener/concrete densifier in liquid form:
    • is suitable for hardening/densifying surfaces such as:
    • makes concrete more water, stain and abrasion resistant for easier maintenance and longer life.
    • reduces:
      • significantly the risk of capillary cracks
      • water absorption
      • porosity of cement mortars
      • the creation of surface dust on old cement mortars
  • Form: Liquid
  • Density: 1,20 ± 0,05 kg/L
  • pH: 11,3 ± 0,2

Substrate preparation:

The surfaces to be treated with PLANOFINISH CH PLUS should be open porous, clean, free from loose elements, powders, salts, grease, oils, dirt and any other material that could reduce material penetration. New concrete as well as mortars before application should have developed enough strength, ideally applied after 24 hours. If for example due to environmental conditions it is necessary to apply earlier, wait until the surface is hard enough.

Application:

Apply PLANOFINISH CH PLUS by spraying, dissolved in water 1:1 to 1:2, depending on the type of surface and the absorbency but without superficial excess. In any case, keep wet the surface where the PLANOFINISH CH PLUS has been applied for 15-20 minutes. Repeat the above procedure, if required.

Recommendations:

Do not apply to surfaces:

  • At low temperatures and at temperatures below 5°C
  • Based on gypsum
  • Glossy without testing
  • Sensitive to alkalis such as glass, aluminum etc. In case of contact, rinse immediately with water
  • Do not use high pressure sprayers
  • Before using, consult the safe use instructions on the label
  • Keep out of the reach of children

Legal Notice:

The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.