Technical Data Sheet
Declaration of Performance
Safety Data Sheet

PROTECT 100

Waterproofing protection for natural stones, mortars and concrete in internal and external areas

Silicone based water repelling agent for the waterproofing protection of natural stones, veneer bricks, renders, cement based joints between tiles and mineral surfaces. It provides good waterproofing protection while in the same time it allows to the surface to ‘breathe’. It is suitable also for external areas.

Consumption: 0,1-2 L/m²
Color: White
Package: Containers 1 L, Containers 20 L, Containers 5 L
Pallet: 450 L, 480 L

Description

  • PROTECT 100 is suitable as hydrophobic impregnation and protection from oily pollutants for:
  • Form: liquid
  • Density: 1,0 ± 0,1 kg/L
  • Application temperature: from +10°C up to +35°C

Application:

PROTECT 100 is applied undiluted with roller, spray or by immersion. The application surface must be dry, clean, free of dust and in general materials which might compromise adhesion.

Roller: it applied with light pressure until saturation. If required a second layer can be applied perpendicular to the first within 30 minutes.

Airless spray: spraying is done with suitable equipment from a distance of 25 - 30 cm from the surface, taking care the material to be absorbed until saturation. It is recommended that the application be done from top to bottom and when applied outdoors no strong winds must be present.

By immersion: immersion must be done inside clean containers. The immersion time is from 10 to 30 minutes depending on the absorbency of the waterproofing surface.

Surfaces treated with PROTECT 100 must be protected for at least 5 hours from rain and high temperatures.

Recommendations:

  • Apply only on structurally stable and well prepared substrates
  • Avoid direct exposure to sunlight and/or strong wind and rain
  • Do not add water or other liquids
  • Do not apply when the substrate & ambient temperatures are lower than +5°C and higher than +35°C
  • Do not apply upon wet surfaces
  • In natural stones it is recommended to perform a trial test before

Legal Notice:

The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.