Description
- SC FAST is suitable for:
-
- sealing surface water leaks
- localized leaks on cementitious surfaces
- constructing wells that will be exposed to fluids in a short period of time
-
SC FAST
Ultra-fast setting hydraulic mortar for instant sealing of spot leakage in concrete constructions
One component and super-fast setting cement based compound for sealing water leaks, even under continuous water pressure. The product works as a “water plug” and after the water leak is sealed the waterproofing of the total surface is finished by applying the proper waterproofing compound like SC ELASTIC or SC 200 PENETRATE.
Consumption: 1,7 kg/L of cavity
Color: Grey 
Package: Containers 1 kg, Containers 5 kg 
Pallet: 384 kg, 450 kg - Form: powder
- Workability: approx. 3 minutes
- Application temperature: from +5°C up to +30°C
Substrate preparation:
The substrate for application should be structurally stable, clean from grease, oils, loose particles. If it is dry, it should be thoroughly wetted with plenty of water.
Application:
Spot application:
Expand the leakage point (crack, hole, etc.) conically, about 2-3 cm, in the opposite direction of water flow. Mix a small amount with water for 5-10 seconds until the mixture acquires a firm texture, similar to clay, and press it onto the leakage point for about 1 minute, until it achieves the desired hardness.
Surface application:
Apply by hand wearing suitable gloves or with a brush directly to the wet but stable surface until SC FAST powder dries. Then, apply two coats of either SC ELASTIC EASY or SC ELASTIC waterproofing products. For more information, refer to the respective Technical Data Sheets of the products.
Recommendations:
SC FAST shouldn’t be applied:
- In cases where the substrate and environment temperature is less than +5°C or higher than +30°C
- Directly on anhydrite, metal or flexible substrates
- Over existing expansion joints
Also note the following:
- Do not add cement, gypsum, lime or other binders or substances which may affect the mortar characteristics
- Do not add water when the mortar has started to set
- Application should be performed by professional skilled workers
Cleaning:
Tools, buckets, tiles, etc. can be cleaned with fresh and clean water while SC FAST mix is still fresh. After hardening occurs, cleaning can only be done using mechanical means.
Legal Notice:
The technical data and recommendations included or listed are the outcome of laboratory measurements combined with our current knowledge and expertise. All information and specifications should in any case be considered as indicative. The Company makes every effort to ensure the accuracy of the information provided herein. Product specifications are subject to change without notice and may differ from product images. Due to printing and application procedures, the colors displayed here should be considered as indicative. In particular, variations in materials, substrates and on-site application conditions are such that no warranty can be given or implied reference to the suitability of the materials for trading or use for a particular purpose and conditions of any given project. Anyone interested in using the product must ensure beforehand that the product is suitable for the intended use and in any case, the user is solely responsible for any outcomes associated with the use of product. Among other things, the Company is not responsible for any normal wear or tear from environmental or any other unsuitable conditions. We reserve the right to revise or change the data herein without prior notice. Restrictions and disclaimers apply to the extent permitted by applicable law. The Company has a Technical Support Department, which has exclusive responsibility for providing technical advice and solutions, addressing relevant issues. Requests to the Technical Support Department are addressed and answered, only in writing. For the latest and valid version of the Technical Data Sheet, the user of the material must refer to our website www.novamix.gr.
